Skip to content

LDAP Additions in GitLab EE (STARTER ONLY)

This section documents LDAP features specific to GitLab Enterprise Edition Starter and above.

For documentation relevant to both Community Edition and Enterprise Edition, see the main LDAP documentation.

NOTE: Note: Microsoft Active Directory Trusts are not supported

Use cases

  • User sync: Once a day, GitLab will update users against LDAP.
  • Group sync: Once an hour, GitLab will update group membership based on LDAP group members.

Multiple LDAP servers

With GitLab Enterprise Edition Starter, you can configure multiple LDAP servers that your GitLab instance will connect to.

To add another LDAP server:

  1. Duplicating the settings under the main configuration.
  2. Edit them to match the additional LDAP server.

Be sure to choose a different provider ID made of letters a-z and numbers 0-9. This ID will be stored in the database so that GitLab can remember which LDAP server a user belongs to.

User sync

Once per day, GitLab will run a worker to check and update GitLab users against LDAP.

The process will execute the following access checks:

  • Ensure the user is still present in LDAP.
  • If the LDAP server is Active Directory, ensure the user is active (not blocked/disabled state). This will only be checked if active_directory: true is set in the LDAP configuration.

NOTE: Note: In Active Directory, a user is marked as disabled/blocked if the user account control attribute (userAccountControl:1.2.840.113556.1.4.803) has bit 2 set. See https://ctovswild.com/2009/09/03/bitmask-searches-in-ldap/ for more information.

The user will be set to ldap_blocked state in GitLab if the above conditions fail. This means the user will not be able to login or push/pull code.

The process will also update the following user information:

  • Email address.
  • If sync_ssh_keys is set, SSH public keys.
  • If Kerberos is enabled, Kerberos identity.

NOTE: Note: The LDAP sync process updates existing users while new users will be created on first sign in.

Group Sync

If your LDAP supports the memberof property, when the user signs in for the first time GitLab will trigger a sync for groups the user should be a member of. That way they don't need to wait for the hourly sync to be granted access to their groups and projects.

A group sync process will run every hour on the hour, and group_base must be set in LDAP configuration for LDAP synchronizations based on group CN to work. This allows GitLab group membership to be automatically updated based on LDAP group members.

The group_base configuration should be a base LDAP 'container', such as an 'organization' or 'organizational unit', that contains LDAP groups that should be available to GitLab. For example, group_base could be ou=groups,dc=example,dc=com. In the config file it will look like the following.

Omnibus configuration

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_servers'] = YAML.load <<-EOS
main:
  ## snip...
  ##
  ## Base where we can search for groups
  ##
  ##   Ex. ou=groups,dc=gitlab,dc=example
  ##
  ##
  group_base: ou=groups,dc=example,dc=com
EOS

  2. Apply your changes to GitLab.

Source configuration

  1. Edit /home/git/gitlab/config/gitlab.yml:

    production:
  ldap:
    servers:
      main:
        # snip...
        group_base: ou=groups,dc=example,dc=com

  2. Restart GitLab for the changes to take effect.

To take advantage of group sync, group owners or maintainers will need to create one or more LDAP group links.

NOTE: Note: If an LDAP user is a group member when LDAP Synchronization is added, and they are not part of the LDAP group, they will be removed from the group.

Adding group links

Once group sync has been configured on the instance, one or more LDAP groups can be linked to a GitLab group to grant their members access to its contents.

Group owners or maintainers can add and use LDAP group links by:

  1. Navigating to the group's Settings > LDAP Synchronization page. Here, one or more LDAP groups and filters can be linked to this GitLab group, each one with a configured permission level for its members.
  2. Updating the group's membership by navigating to the group's Settings > Members page and clicking Sync now.

Filters (PREMIUM ONLY)

In GitLab Premium, you can add an LDAP user filter for group synchronization. Filters allow for complex logic without creating a special LDAP group.

To sync GitLab group membership based on an LDAP filter:

  1. Open the LDAP Synchronization page for the GitLab group.
  2. Select LDAP user filter as the Sync method.
  3. Enter an LDAP user filter in the LDAP user filter field.

The filter must comply with the syntax defined in RFC 2254.

Administrator sync

As an extension of group sync, you can automatically manage your global GitLab administrators. Specify a group CN for admin_group and all members of the LDAP group will be given administrator privileges. The configuration will look like the following.

NOTE: Note: Administrators will not be synced unless group_base is also specified alongside admin_group. Also, only specify the CN of the admin group, as opposed to the full DN.

Omnibus configuration

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_servers'] = YAML.load <<-EOS
main:
  ## snip...
  ##
  ## Base where we can search for groups
  ##
  ##   Ex. ou=groups,dc=gitlab,dc=example
  ##
  ##
  group_base: ou=groups,dc=example,dc=com

  ##
  ## The CN of a group containing GitLab administrators
  ##
  ##   Ex. administrators
  ##
  ##   Note: Not `cn=administrators` or the full DN
  ##
  ##
  admin_group: my_admin_group

EOS

  2. Apply your changes to GitLab.

Source configuration

  1. Edit /home/git/gitlab/config/gitlab.yml:

    production:
  ldap:
    servers:
      main:
        # snip...
        group_base: ou=groups,dc=example,dc=com
        admin_group: my_admin_group

  2. Restart GitLab for the changes to take effect.

Global group memberships lock

"Lock memberships to LDAP synchronization" setting allows instance administrators to lock down user abilities to invite new members to a group.

When enabled, the following applies:

  • Only administrator can manage memberships of any group including access levels.
  • Users are not allowed to share project with other groups or invite members to a project created in a group.

Adjusting LDAP user sync schedule

Introduced in GitLab Enterprise Edition Starter.

NOTE: Note: These are cron formatted values. You can use a crontab generator to create these values, for example http://www.crontabgenerator.com/.

By default, GitLab will run a worker once per day at 01:30 a.m. server time to check and update GitLab users against LDAP.

You can manually configure LDAP user sync times by setting the following configuration values. The example below shows how to set LDAP user sync to run once every 12 hours at the top of the hour.

Omnibus installations

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_sync_worker_cron'] = "0 */12 * * *"

  2. Reconfigure GitLab for the changes to take effect.

Source installations

  1. Edit config/gitlab.yaml:

    cron_jobs:
  ldap_sync_worker_cron:
    "0 */12 * * *"

  2. Restart GitLab for the changes to take effect.

Adjusting LDAP group sync schedule

NOTE: Note: These are cron formatted values. You can use a crontab generator to create these values, for example http://www.crontabgenerator.com/.

By default, GitLab will run a group sync process every hour, on the hour.

CAUTION: Important: It's recommended that you do not run too short intervals as this could lead to multiple syncs running concurrently. This is primarily a concern for installations with a large number of LDAP users. Please review the LDAP group sync benchmark metrics to see how your installation compares before proceeding.

You can manually configure LDAP group sync times by setting the following configuration values. The example below shows how to set group sync to run once every 2 hours at the top of the hour.

Omnibus installations

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_group_sync_worker_cron'] = "0 */2 * * * *"

  2. Reconfigure GitLab for the changes to take effect.

Source installations

  1. Edit config/gitlab.yaml:

    cron_jobs:
  ldap_group_sync_worker_cron:
      "*/30 * * * *"

  2. Restart GitLab for the changes to take effect.

External groups

Introduced in GitLab Enterprise Edition Starter 8.9.

Using the external_groups setting will allow you to mark all users belonging to these groups as external users. Group membership is checked periodically through the LdapGroupSync background task.

Omnibus configuration

  1. Edit /etc/gitlab/gitlab.rb:

    gitlab_rails['ldap_servers'] = YAML.load <<-EOS
main:
  ## snip...
  ##
  ## An array of CNs of groups containing users that should be considered external
  ##
  ##   Ex. ['interns', 'contractors']
  ##
  ##   Note: Not `cn=interns` or the full DN
  ##
  external_groups: ['interns', 'contractors']
EOS

  2. Apply your changes to GitLab.

Source configuration

  1. Edit config/gitlab.yaml:

    production:
  ldap:
    servers:
      main:
        # snip...
        external_groups: ['interns', 'contractors']

  2. Restart GitLab for the changes to take effect.

Group sync technical details

There is a lot going on with group sync 'under the hood'. This section outlines what LDAP queries are executed and what behavior you can expect from group sync.

Group member access will be downgraded from a higher level if their LDAP group membership changes. For example, if a user has 'Owner' rights in a group and the next group sync reveals they should only have 'Developer' privileges, their access will be adjusted accordingly. The only exception is if the user is the last owner in a group. Groups need at least one owner to fulfill administrative duties.

Supported LDAP group types/attributes

GitLab supports LDAP groups that use member attributes:

  • member
  • submember
  • uniquemember
  • memberof
  • memberuid.

This means group sync supports, at least, LDAP groups with object class: groupOfNames, posixGroup, and groupOfUniqueNames.

Other object classes should work fine as long as members are defined as one of the mentioned attributes. This also means GitLab supports Microsoft Active Directory, Apple Open Directory, Open LDAP, and 389 Server. Other LDAP servers should work, too.

Active Directory also supports nested groups. Group sync will recursively resolve membership if active_directory: true is set in the configuration file.

NOTE: Note: Nested group membership will only be resolved if the nested group also falls within the configured group_base. For example, if GitLab sees a nested group with DN cn=nested_group,ou=special_groups,dc=example,dc=com but the configured group_base is ou=groups,dc=example,dc=com, cn=nested_group will be ignored.

Queries

  • Each LDAP group is queried a maximum of one time with base group_base and filter (cn=<cn_from_group_link>).
  • If the LDAP group has the memberuid attribute, GitLab will execute another LDAP query per member to obtain each user's full DN. These queries are executed with base base, scope 'base object', and a filter depending on whether user_filter is set. Filter may be (uid=<uid_from_group>) or a joining of user_filter.

Benchmarks

Group sync was written to be as performant as possible. Data is cached, database queries are optimized, and LDAP queries are minimized. The last benchmark run revealed the following metrics:

For 20000 LDAP users, 11000 LDAP groups and 1000 GitLab groups with 10 LDAP group links each:

  • Initial sync (no existing members assigned in GitLab) took 1.8 hours
  • Subsequent syncs (checking membership, no writes) took 15 minutes

These metrics are meant to provide a baseline and performance may vary based on any number of factors. This was a pretty extreme benchmark and most instances will not have near this many users or groups. Disk speed, database performance, network and LDAP server response time will affect these metrics.

Troubleshooting

Please see our administrator guide to troubleshooting LDAP.